Menu
Skip to content 
Chemequip 13X-APG molecular sieve is dedicated to air cryogenic separation industry, applicable to any sizeof air cryogenic separation devices. The adsorption capacity of carbon dioxide and moisture was further improved to avoid the tower frozen phenomenon in the distillation process.
Good kinetic characteristics can maximize the adsorption effect of the existing adsorption bed, and reduce the size of the newly designed adsorption bed, thus decrease energy consumption
Chemequip 13X-APG molecular sieve can be purged and regenerated by increasing the temperature, regeneration (dehydration) degree depends on the humidity and temperature of the purging gas.
Water Removal: Heat dry gas such as nitrogen, air, hydrogen, saturated hydrogen carbide to 150-320℃, then pass it into the molecular sieve bed under the pressure of 0.3-0.5 kg/m2 for 3-4 hours, and then pass the dry cold gas into the adsorber for 2-3 hours, isolate the air and cool it to room temperature.
Organic Removal: Replace the adsorbent from the molecular sieve by vapor, and then heat. Or pass into hot vapor or inert gas at the in 200-350℃, not use gases that produce explosive mixtures by contact with the adsorbent.
Gas Removal: Reduce the pressure.
RELIABLE MANUFACTURER OF MOLECULAR SIEVE
Address:
Building 53, No.1500 Xinfei Avenue, Shanghai
No.229, Qingyijiang West Avenue, Xuancheng
We will contact you within 1 working day, please pay attention to the email with the suffix “@cnmstable.com”.
Optimized by Seraphinite Accelerator